Mud Hopper , Mixing Hopper
FSI Mud Hopper
6 inch high shear low pressure mud hopper. Complete with 2 in(also 1.5 inch special lower volume nozzle, venturi, funnel, sack table, 6 inch butterfly, valve all mounted on a base. This hopper with 2 inch nozzle handles 800-900 pounds barite per minute. Three(3) inch male NPT inlet and 6 inch weld neck outlet. (Other end types are available). Unit primed with carbo zinc and painted with finish coat.
WT. 325#
4 inch high shear low pressure mud hopper. Complete with 1.5 inch nozzle, venturi, funnel, sack table, 4 inch butterfly, valve all mounted on a base. The hopper with 1.5 inch nozzle handles 5-600 pounds barite per minute. Three(3) inch male NPT inlet and 4 inch weld neck outlet. (Other end types are available). Unit primed with carbo zinc and painted with finish coat. WT. 275#
6 inch high shear high pressure mud hopper. Complete with 1/2 inch nozzle, venturi, funnel, sack table, 6 inch butterfly, valve all mounted on a base. This hopper with a 1/2 inch nozzle handles approximately 600 pounds barite per minute. two(2) inch male NPT inlet and 6 inch weld neck outlet. (Other end types are available). Unit primed with carbo zinc and painted with finish coat. WT. 315#
For more information about our mud hoppers.
Contact us.
