Complete Mud Systems.Fluid Systems, Inc. is proud to introduce the first FSI High Performance Mud Systems. Fluid Systems' engineers have designed these units to achieve optimum performance, even in the most challenging applications. The FSI mud systems feature three easy access clean-out ports and a sandtrap that flows into two connected chambers divided by adjustable height equalization. We can customize 250, 500, 1000, 1500, 3000bbls to fit your needs.

• Black Thunder^TM VGS™ 3 panel linear motion shaker with 25.4 sq ft of screening area
• 20L B.VGS™ capable 2 panel linear motion shaker with 16.87 sq ft of screening area
• 50 B.VGS™ capable 2 panel linear motion shaker with 16.87 sq ft of screening area
• 500 B.VGS™ capable 3 panel linear motion shaker with 25.4 sq ft of screening area
• 5000 B. VGS™ capable 4 panel linear motion shaker with 34 sq ft of screening area
• 500 ELS. 3 panel elliptical or linear motion shaker with 25.4 sq ft of screening area
• 500 BSBS. VGS™ capable side-by-side linear motion shakers with 50.8 sq ft total screening area
• RUMBA201-ST. This space saving high thrust unit stands 41" high, with an overall weir height of only 35" and a screening area of 60 sq ft.
  

• 50/500B. VGS™ capable 5 panel cascade unit with 42.17 sq ft of screening area
• 500/500B. VGS™ capable 6 panel cascade unit with 50.6 sq ft of screening area
• 500/500 EOL. VGS™ capable 6 panel cascade unit with 50.6 sq ft of screening area

• A50B. VGS™ capable 2 panel replacement shaker with 16.87 sq ft of screening area
• A500B. VGS™ capable 3 panel replacement shaker with 25.4 sq ft of screening area
  FSI designed these units to replace many competitor's shaker beds at a fraction of the cost of a new machine but still achieve optimum performance. It upgrades existing shaker beds.

Centrifugal Pumps. Our pumps are designed to charge desanders, desilters, mud mixing operations, for super charging and even fresh water transfer. They are available in 25hp, 40hp, 50hp, 60hp, 75hp and more.

• Mixing Hoppers
• 1. 6 inch high shear low pressure
• 2. 4 inch high shear low pressure

Centrifuge Decanter . Available in different model and sizes designed for the separation of solids/liquid in two or three phases. Its casing is made of high quality carbon steel with easy access to the drum with cover subdivided in three parts. The unit is mounted on vibration dampers. Bowl and screw are completely made of stainless steel with special wear proof protection on its peripheral screw area.

• "3D" Double Deck ^TM.VGS™ capable, double deck, 6 panel linear motion cuttings drier with 50.6 sq ft of screening area
• 5000B CD. VGS™ capable 4 panel linear motion cuttings drier with 34 sq ft of screening area
  
  

Vacuum Round Degasser. FSI Round-Degasser is a rugged vacuum unit designed to safely and efficiently remove 99.9% of entrained air and gases such as methane, H₂S, and CO₂ from drilling fluids. It is a 5 hp motor with starter and fan guard, 4600 sq.in. baffle surface area, epoxy coated internal surface to resist corrosion, fail-safe overflow valve, low maintenance float assembly, easy access to baffles and float switch, compact design for easy placement, skid-mounted, and approx. 4000lbs. dry weight.

Atmospheric Degasser processes mud by accelarating fluid through a submerged pump impeller and impinging the fluid on a stationary baffles to maximize surface area and thus enable gases to escape to the atmosphere. It removes gases from drilling muds with process rate dependent on mud solids content and fluid viscosity.

Mud Agitators. Available in 7.5hp, 10hp, 15hp, 20hp and others. It uses an impeller to mix and suspend the solids using both axial and radial flows, and by utilizing low shear mixers to suspend and thereby mix mud additives particle size degradation and polymer shear.

Mud Guns. Available in swivel and stationary type with nozzles made of special high wear resistance rubber for a lower rapair cost.

Desander.. Units available with 1 to 4 cones/header and a capacity of 500GPM(1892.70lpm) per cone.

Desilter. Units available with 1 to 20 cones per header and a capacity of 100GPM(378.5lpm) per cone.

Mud cleaner is a combination of hydrocyclone mounted above a shale shaker. The primary use of the mud cleaner has always been the removal of drilled solids larger than barite.  Its secondary purpose is to remove drilled solids from unweighted drilling fluids.